
8
Ways to Shoot Video Like a Pro
By Rick Broida
Nothing brings out the camcorders like the holidays, which is why
this is the perfect time to admit an ugly truth: You suck at making home
movies.
There's more to videography than just taking the camcorder out of
the box and pressing Record.
As with photography, good videography requires a bit of know-how.
1. A good
fisherman knows what's in his tackle box, and a good videographer knows his
camcorder. The moment Junior takes his first steps or a spaceship lands in the
backyard, you should be able to adjust the shutter speed, turn off the
autofocus, or do whatever else is necessary to capture the best images. In
other words, learn your camcorder inside and out. Read the manual--twice. Know
how to access the menus, which menus contain which settings, and so on. Keep a
crib sheet handy if necessary (laminate a 3x5 card, hole-punch it, and attach
it to the neck strap). A little bit of study and preparation can go a long way
toward helping you shoot better video. Now, onto the advice you might actually
follow.
2. Be prepared
Anytime you go somewhere with your camcorder, here's what you
should be packing:
¥ At least one spare battery, fully charged.
¥ At least two more blank tapes than you think you'll need.
¥ A lens-cleaning cloth. No matter how careful you are, the lens
is going to get smudged.
There's no post-production software filter in the world that can
correct for that.
¥ A tripod. Throw it in the trunk, even if you don't think you'll
need it.
¥ The battery charger/power supply.
¥ An extension cord for the power supply, which you'll invariably
need.
¥ Duct tape, for taping down the extension cord so people don't
trip over it.
¥ Lighting gear, lens filters, microphones, and any other
accessories you own. You bought them for
a reason, right?
Bring 'em!
3. Use a tripod
It's a lot harder than it looks to pull off that cool shaky-camera
look. Most home video just ends up looking shaky, which is absolutely no fun to
watch. By mounting your camcorder on a $20 tripod, you'll get rock-steady
footage. At the same time, you'll free yourself to perform pans and zooms, or
even to get in front of the lens. If you're planning to rely on your camera's
digital image-stabilization feature, don't. All that does is lower the video
resolution by cropping to the center of the frame. Optical image stabilization
is better, but it still can't beat a tripod.
No tripod? Lean against a wall. That'll help keep the shakiness to
a minimum. No wall? Put your butt on the ground, bend your knees, and prop your
elbows on them. Presto: instant tripod.
4. Raise the lights
To paraphrase the old real estate maxim, good videography is all
about lighting, lighting, lighting. Most of the camcorders I've reviewed over
the years do a really crummy job under poor lighting, producing grainy,
washed-out video that can't be improved in post-production. (Hey, there's only
so much your video-editing software can do.) The easiest way to overcome
lighting issues is to shoot outdoors, where even a cloudy day produces enough
ambient light to keep your video crisp and colorful. If it's sunny, try to
shoot in the morning or late afternoon when the sun is lower in the sky. When
it's directly overhead, it casts unflattering shadows on subjects' faces.
When shooting outdoors isn't an option, bring as much light into
the room as you can. Turn on lamps and open blinds to let outside light in. If
your camcorder has a built-in light, use it. At the very least, it will help
bring out faces in close-up shots. A shoe-mounted external light can be helpful
as well. Many camcorders allow you to adjust aperture, white balance, shutter
speed, and other light-oriented settings, but these will get you only so far
unless it's a really high-end model. My advice for when the lights are low is
to disable the autofocus, otherwise you risk getting that annoying pulsing
effect from the lens trying to lock onto a subject.
5. Ace the audio
If lighting is the most important element in quality video, audio
runs a close second. Unfortunately, this is one area where it can be difficult
to achieve professional results. The microphones built into most camcorders are
fairly basic, recording audio from any direction. If you're trying to film
someone talking near a busy street, the traffic may drown out the person's
voice. Your best bet is to get your subject(s) as close to the microphone as
possible (without sabotaging the shot, of course).
Ideally, your camcorder should have a jack for plugging in an
external microphone. There are many varieties to choose from, including:
shotgun mikes for capturing audio directly in front of the lens; lavaliere
(a.k.a. tie-clip) mikes for sit-down interviews and stand-up reporting; and
pzm-type mikes, which are omni-directional and therefore suitable for
auditoriums, large conference rooms, and the like. Hopefully, any camcorder
outfitted with a microphone jack will also have one for headphones, which is
essential for monitoring audio levels as you record.
6. Set up your shots
Smart photographers obey the "rule of thirds," and you
should do the same. Imagine a tic-tac-toe board over your viewfinder. The lines
intersect in four spots. Your goal should be to frame the action using one or
more of those spots. Or, to put it another way, keep the birthday girl out of
the center square.
Of course, if you're feeling creative, you can always throw this
rule out the window. But don't go overboard: Many amateurs fall in love with
their camcorders' built-in special effects, then later regret filming an entire
birthday party in "old movie" mode. Although these effects can be
fun, use them sparingly--or not at all. Better you should start with pristine
color video, then apply special effects using your editing software. Likewise,
skip the camcorder's auto-fade features; your editing software will give you
far greater control over transitions, and greater variety as well.
7. No digital zoom!
Optical zoom, good. Digital zoom, bad. Very bad. Sorry if you were
suckered into buying a particular camcorder because it touted some astronomical
digital-zoom number (240X! 300X! 800X!), you should never use it--unless you
like grainy, pixilated video. Digital zoom is actually a big fake: As you
increase the zoom level, the camcorder crops further and further into the
center of the image, enlarging that cropped portion so it fills the screen. As
a result, your video looks, well, awful. Stick with your camcorder's optical
zoom (usually you can turn off digital zoom from within the camera's menu
system), which relies solely on the lens for magnification. If you need to get
closer to your subject, follow the old photographer's maxim: zoom with your
feet.
8. Shoot B-roll
B-roll is secondary footage that you splice into your primary
video to flesh out the story. For instance, if you're filming a wedding, you
might take shots of the church, the invitation, and the little bride and groom
atop the cake. When the time comes to assemble your final movie, you can mix in
this footage to add variety.
Anything can be B-roll. During the warm-up before the soccer game,
for instance, get some footage of just the kids' feet. Grab a close-up shot of
the ball hitting the net. Get there early and record the empty field; then
record from the same position during the game and you can do a neat fade-in. This
is where planning comes into play: You should not only allow extra time to
shoot B-roll, but also determine in advance what shots will make the best
additions.